Isolastic is a latex additive to be mixed with Kerabond or Kerafloor to improve the performance and deformability to satisfy class C2 (improved cementitious adhesive) according to EN 12004 and class S2 (highly deformable adhesive) according to EN12002 requirements.  Adhesives obtained this way are suitable for interior and exterior bonding of all types of ceramic tiles (double-fired, single-fired, quarry tiles, klinker, terracotta, glass mosaics, porcelain tiles, etc.) and stone material on conventional substrates, on concrete, precast concrete panels as well as cured (3 months), heating panels, fibrous cement, plaster board and wood or wood composition panels as long as they are firmly fixed.  Installations can be carried out over a gypsum-based or anhydrite surfaces only if specifically primed beforehand.  Isolastic diluted 1:1 with water can be also mixed with Adesilex P10 to improve its deformability to satisfy class S1 requirements according to EN 12002.

Kerabond/Kerafloor + Isolastic:
Pot life: Over 8 hours.
Open time: 20 minutes.
Grouting: Walls: 4-8 hours; Floors: 24-36 hours.
Set to light foot traffic: 24-36 hours.
Ready for use: Approximately 14 days.
Deformability according to EN 12002: S2 – highly deformable
(Adesilex P10 + Isolastic diluted 1:1 with water – S1 deformable).
Application: Kerabond/Isolastic: Notched trowel No. 4, 5 or 6.
Kerafloor/Isolastic: Notched trowel No. 6 or 10, or trowel for Kerafloor.
Adesilex P10/Isolastic diluted 1:1 with water: Notched trowel No. 4, 5 or 6.
Storage: 24 months.  Protect from frost.
Consumption: 1-2kg/m.
Packaging: 25-10-5kg drums; 12x1kg packs.

ORDER No.

12x1, 5, 10, 25kg
MISO-12x1
MISO-05
MISO-10
MISO-25